SafeArc Docs

Create an email account

1. 1Open Sign in and choose the registration option.
2. 2Enter your email and a strong password, then complete any email confirmation requested.
3. 3Open Profile and choose your display name and username.
4. 4Connect or create a wallet when you are ready to use payments.

Sign in with an existing wallet

1. 1Open Sign in and choose the wallet option.
2. 2Connect your wallet and select the account you intend to use.
3. 3Read and sign the ownership message in your wallet.
4. 4Check your profile before posting or receiving tips.

Important: Never enter your recovery phrase into a sign-in form or send it to support.

Set up your public identity

1. 1Open Profile and expand the editor.
2. 2Choose a unique username, add a display name and a short bio.
3. 3Add an avatar, banner and website if you want them shown.
4. 4Save, then check your public profile and linked wallet address.

Choose your privacy settings

1. 1Open Settings and find Account settings.
2. 2Review private-account and profile visibility options.
3. 3Choose who can send you messages and whether you accept tips.
4. 4Save any changes that require confirmation.

Important: Profile privacy cannot hide transactions already recorded on Arc.

Publish your first post

1. 1Sign in and open Feed.
2. 2Write your post. Add #hashtags or @mentions where relevant.
3. 3Attach permitted media or paste a token contract address for a token card.
4. 4Publish and wait for the safety check. Open the post to review it.

Reply, repost or share

1. 1Open a post’s comments to write a reply or attach a permitted comment image.
2. 2Use Like to support the post or Share to choose Repost or Quote.
3. 3For a quote, add your own text and publish.
4. 4Copy the post link from Share when you want to send it outside SafeArc.

Attach an image or video

1. 1Open the feed composer and select the image or video attachment control.
2. 2Choose a supported file within your size limit.
3. 3Add your post text and publish.
4. 4For a comment image, use the attachment control inside the comment composer instead.

Important: Posts: images 5 MB; verified videos 10 MB; admin videos 50 MB. Comment images: 2 MB.

Connect and fund an existing wallet

1. 1Choose Connect MetaMask / OKX from the menu or Wallet page.
2. 2Select the account in your wallet and approve the connection.
3. 3Switch to the Arc network requested by SafeArc.
4. 4Copy and verify your address before funding it on that same network.
5. 5Keep enough USDC for the payment and network fees; try a small amount first.

Important: Sending tokens on the wrong network can cause loss. Never use a contract address as your receiving wallet address.

Check balances and history

1. 1Open Wallet with your intended wallet connected.
2. 2Review the USDC balance and SAFEARC section.
3. 3Use the portfolio menu to add or hide watched tokens.
4. 4Review verified payment history and open a transaction link to check it on Arc.

Create and secure a wallet

1. 1Sign in, open Wallet and choose Create wallet in the SafeArc wallet section.
2. 2Enter a unique password of at least 8 characters and repeat it.
3. 3Write down the recovery phrase and store it privately offline.
4. 4Confirm you saved it and check that the wallet linked to your profile successfully.
5. 5Verify the address and test with a small amount before committing more funds.

Important: SafeArc cannot reset the wallet password or recover funds without your backup. Never share wallet secrets, including in chat.

Import, back up or switch wallets

1. 1Choose Import existing and enter your phrase or private key only in the wallet import form on the genuine SafeArc site.
2. 2Set a local wallet password and complete the import.
3. 3Use Back up to inspect your backup privately, then Hide to close it.
4. 4Choose Use this wallet when returning to the built-in wallet, or switch to MetaMask / OKX through the wallet controls.

Important: Keep recovery words out of screenshots, cloud notes, messages and support conversations.

Send a post tip

1. 1Open the author’s post and select the tip control.
2. 2Connect the wallet linked to your SafeArc profile.
3. 3Enter the amount in USDC and check the author’s receiving address.
4. 4Approve the transaction in your wallet and wait for its confirmation and verified receipt.

Important: Public post tips may be announced on Telegram. Do not resend while a successful transaction is still being verified.

Start a chat

1. 1Sign in and open Members or a member’s profile.
2. 2Select the envelope when messaging is available.
3. 3Type your message in the conversation and send it.
4. 4Use Messages to return to the chat and monitor unread alerts.

Pay your conversation partner in USDC

1. 1Open a direct conversation and select the USDC payment control.
2. 2Choose MetaMask / OKX, or SafeArc wallet if one exists on this browser.
3. 3Check the sender and your partner’s linked receiving address.
4. 4Enter the amount, keeping enough USDC for the network fee.
5. 5Approve in your external wallet or unlock the SafeArc wallet with its password.
6. 6Wait for the verified receipt to appear in the chat and check the explorer link.

Important: Confirmed payments are irreversible. Chat payments go only to the conversation partner’s linked wallet.

Create and manage a group

1. 1With an active Blue Check or an administrator account, open Messages and choose Groups.
2. 2Use the creation control, give the group a name and add members.
3. 3Open group management to review the member list and assign permitted roles.
4. 4Use the available rename, remove-member, leave or owner-only delete controls as needed.

Important: Role permissions are enforced by SafeArc; a member cannot promote themselves by changing a display name.

Find members and invite friends

1. 1Open Members and search for a name or username.
2. 2Follow people you want to keep up with and check Who to follow suggestions.
3. 3Set your own username in Profile, then open Invite contest.
4. 4Copy your personal invitation link and share it. Review recorded referrals in the leaderboard.

Review notifications and hashtags

1. 1Open Alerts to see activity involving your account.
2. 2Follow an alert’s post or profile link for context.
3. 3Select #hashtags in the feed to explore related posts.
4. 4Use Radar’s Pulse tab for a wider view of community activity.

Swap on Arc

1. 1Connect the wallet you want to trade from and confirm the Arc network.
2. 2Open Swap and select the two tokens using verified contract addresses.
3. 3Enter the input amount and wait for a quote.
4. 4Review output, slippage and fees. Approve the token allowance if requested.
5. 5Sign the swap and wait for confirmation. Check your balance and transaction link.

Important: Prices can move between quote and execution. A token’s tax may apply in addition to route and network fees.

Trade from a token card

1. 1Open the token card in a post, Screener or the SAFEARC token page.
2. 2Check its contract, available chart, liquidity and risk information.
3. 3Select Buy or Sell and connect your preferred wallet.
4. 4Review the trade details, approve as needed and sign. Wait for confirmation before submitting another trade.

Add and remove pool liquidity

1. 1Open Pools and confirm that a configured pool contract is available.
2. 2Connect your wallet and select both tokens.
3. 3Enter the amounts and review the ratio, especially for a new pool.
4. 4Approve both token allowances where requested, then sign Add liquidity.
5. 5Find your pool share under All pools and use 25%, 50% or 100% when you want to remove liquidity.

Important: Liquidity provision can lose value. The current flow does not offer a user-adjustable minimum-received protection for adding or removing liquidity.

Bridge into Arc

1. 1Open Bridge to Arc and choose the starting chain, token and amount.
2. 2Choose the Arc token you want to receive.
3. 3Check the Arc 0x recipient address carefully — never a Solana address.
4. 4Review the quote, fees and estimated time.
5. 5Connect your wallet, confirm, and wait for the Arc transaction link.

Important: Test with a small amount first. Prices can move between quote and confirmation.

Get around the city

1. 1Open Space City from the Social section of the menu.
2. 2Drag to rotate and pinch or scroll to zoom.
3. 3Tap a building to open its details, or use the Arc ecosystem list to jump to a token.
4. 4Sign in to chat, appear on the map and trade.

Discover and inspect an Arc token

1. 1Open Screener and choose Trending, Top Volume or New Pairs.
2. 2Search using a verified token contract address when possible.
3. 3Open the token card and compare price, liquidity, volume, holders and concentration.
4. 4Switch available chart ranges and inspect the update indicator.
5. 5Use Buy/Sell only after checking the risks and connecting your wallet.

Important: A listing or a green price change is not an endorsement. Market providers may return delayed or incomplete data.

Screen a new pair

1. 1Open SafeArc Radar and select Tokens.
2. 2Review the score and Safe/Watch/Risky label alongside liquidity, age and available holder signals.
3. 3Read the risk reasons, including unusual price movement or volume.
4. 4Open the token’s details or Screener to compare market data before considering a trade.

Important: Radar is a screening aid, not a security audit, honeypot simulation or financial recommendation.

Watch whales and community activity

1. 1Open Radar and choose Whales.
2. 2Review trade amounts and follow transaction links to the Arc explorer.
3. 3Switch to Pulse to browse current hashtags, tips and new members.
4. 4Open the relevant profile or topic for context instead of copying a trade blindly.

Review tokenomics and claimable rewards

1. 1Open SafeArc Token and verify the complete official contract address.
2. 2Inspect price, liquidity, supply and the recognized burned amount.
3. 3Review fee allocation, escrow totals and reward eligibility information.
4. 4Connect your holding wallet to check your balance and claimable rewards.
5. 5Use Claim only when rewards are available, then verify the confirmed transaction.

Important: Recorded fees, allocated buyback funds and completed token burns are different metrics. None promises future returns.

Buy or renew Blue Check

1. 1Open Settings and find the Blue Check purchase section.
2. 2Check the price, treasury destination and current verification expiry.
3. 3Connect the wallet linked to your profile on Arc Mainnet.
4. 4Approve the USDC payment and wait for the on-chain verification.
5. 5Check your updated expiry before using gated tools.

Important: Keep extra USDC for fees. Do not repeat a successful payment just because verification is delayed.

Run an AI token check

1. 1Sign in with an active Blue Check and open AI Token Check.
2. 2Paste the token’s verified Arc contract address.
3. 3Start the check and wait for the streamed analysis.
4. 4Compare the result with the chart, liquidity, holders, explorer and independent research.

Change the look of SafeArc

1. 1Open Settings and find Appearance.
2. 2Select Night, Day or Aurora.
3. 3Pick the background: Animated, Still image or None — new accounts start on None.
4. 4Use Share preview in Settings to inspect social link previews.

Report harmful content safely

1. 1Open the post’s report control.
2. 2Choose or describe the relevant issue accurately.
3. 3Submit the report for administrator review.
4. 4For payment issues, keep the public transaction hash and a sanitized error message. Never include wallet secrets.

Use the official Telegram community

1. 1Follow the Telegram link in the SafeArc footer or open t.me/SafeArcSpace.
2. 2Review ArchieSpace_bot’s public post and tip announcements.
3. 3Ask for help without sharing secrets or private chat contents.
4. 4Treat links and advice from community members as unverified until you check them.

Review reports and account permissions

1. 1Sign in with the administrator account and open Admin panel.
2. 2Review Reports and the related post or account before taking action.
3. 3Use Users to adjust permissions or verification only when appropriate.
4. 4Open Safety & restore to review hidden content and available restore actions.
5. 5Use the post’s pin control to pin or unpin important announcements.

Maintain platform content and configuration

1. 1Use USDC to review verified payment activity and the available balance controls.
2. 2Use Widgets to manage desktop side content.
3. 3Use Burn to maintain recognized burn addresses, verifying each address carefully.
4. 4Open administrator-only Network & contracts in Settings for platform-wide configuration.

Important: Changing a platform contract or burn address affects everyone’s displayed data. Never enter an unverified address.